Heated Filling Machine 20L Heating and Pressurising Lipstick Filling Machine Silver Stainless Steel

Description:

Lipstick filling machine is suitable for filling lipstick, lipstick, and other paste raw materials.

Uses and function:

1. The material barrel is a double-layer barrel that heats the material body using a sandwich and thermal oil. It uses a motor stirrer to effectively control the mixing speed and evenly heat the material body 360 degrees. Additionally, the temperature of each individual material barrel is effectively controlled by its own number display.

2. To improve filling stability, the material nozzle has a separate heating temperature control, and the corresponding temperature may be adjusted based on need.

3. For easy filling, the filling table may be raised and lowered by 100mm.

4. The device is very efficient, practical, simple to use, and has a convenient color changing feature.

Technical Specification:

Uses  Directions:

A. Power switch: turn on or off the power of the machine.
B. Drum temperature control switch: turn on or off the power of drum heating circuit.
C. 24-hour relay: it can be set to energize the machine at a certain time and disconnect it at a certain time. For example, it can be automatically heated one hour in advance before going to work in the morning.
D. Discharge port temperature control switch: turn on or off the power supply of the discharge port heating circuit.
E. Stirring motor speed control: control the stirring speed and switch of the stirring motor.                                      F. Message display: PV (red) shows the system measured value that is the actual temperature, SV (green) shows the system set value that is the set temperature.
G, OUT indicator: input indicator that heating indicator; AT indicator: PID automatic algorithm indicator; ALM1 indicator: Alarm 1 indicator; ALM2 indicator: Alarm 2 indicator
H, SET key: setting, mode key, press this key can enter or exit the temperature and other parameters of the setting; ▼ key: reduce key; ▲ key: increase key; ← key: cursor movement key, press this key to move the number of digits need to modify the value.
I. Time relay: control the filling time.

Packing: