Description:
The heating mixing lipstick drum is used to heat the raw materials by compartmentalized heating, which increases the heating area of the raw materials and effectively controls the heating temperature of the raw materials. Adopting speed-regulating motor, it can effectively control the mixing speed. It has the advantages of easy cleaning, high efficiency and wide application range.
Technical Parameters:
|
Drum capacity |
70L |
|
Power source |
220V/50HZ |
|
Power |
2.2 KW |
|
Mixing speed range |
0-94r/min |
|
temperature range |
0-150℃ |
| Overall dimensions |
750x730x1700MM |
| Net machine volume |
40KG |
Uses Directions:
A. Power switch: turn on or off the power of the machine.
B. Drum temperature control switch: turn on or off the power of drum heating circuit.
C. 24-hour relay: it can be set to energize the machine at a certain time and disconnect it at a certain time. For example, it can be automatically heated one hour in advance before going to work in the morning.
D. Discharge port temperature control switch: turn on or off the power supply of the discharge port heating circuit.
E. Stirring motor speed control: control the stirring speed and switch of the stirring motor.
F. Message display: PV (red) shows the system measured value that is the actual temperature, SV (green) shows the system set value that is the set temperature.
G. OUT indicator: input indicator that heating indicator; AT indicator: PID automatic algorithm indicator; ALM1 indicator: Alarm 1 indicator; ALM2 indicator: Alarm 2 indicator
H. SET key: setting, mode key, press this key can enter or exit the temperature and other parameters of the setting; ▼ key: reduce key; ▲ key: increase key; ← key: cursor movement key, press this key to move the number of digits need to modify the value.
I. Time relay: control the filling time.
Uses Precautions:
A. Please do not turn on the stirring motor when the ingredients are not melted.
B. When the mixing drum is heating, please do not touch the drum to prevent burns.
C. Please clean it after use, so as to avoid unstable and indefinite quantity failure in the future.
D. When adding raw materials, please do not exceed 70% of the volume of the barrel, to prevent the raw materials from spilling out when heating and mixing.
E. Stirring speed is too fast raw materials may produce bubbles.
Packing:
